Changing Serial Communication Settings - Xante Accel-a-Graphix CT4 User Manual

Parity
Parity is the grouping of data bits into a uniform size. If data is lost
or damaged in transmission, it will change the group size, which
provides a warning of transmission errors. Your controller supports
five parity settings, None, Even, Odd, Mark, and Space. The
controller's factory default is None. The PostScript command
"setdevparams" defines the parity of the serial channel for PostScript
Level 2.

Changing Serial Communication Settings

To change serial communications easily, use the controller's front
panel or Command Center. You can also change settings by creating
a PostScript file and sending it to the controller. This is handy if you
are networked to a controller away from your computer.
The following "text only" sample file changes the serial channel to
9600 baud, XON/XOFF, and None parity.
true 0 startjob pop
(%Serial%) <</Baud 9600 /Parity /None
/FlowControl /XonXoff>>
setdevparams
If you are not connecting a second computer to the Ethernet port,
skip to "Connecting to a Printer" later in this chapter.
__________________________________________ Installation 2-23