Miscellaneous Troubleshooting - Xante Accel-a-Graphix CT4 User Manual

Miscellaneous Troubleshooting

This section covers miscellaneous troubleshooting.
§ The controller powers up, but I cannot print from my
application.
Possible Solutions:
•
•
•
§ All the lights on the controller are staying on.
Possible Solution:
•
§ When downloading a font or PostScript file using System 7, the
Macintosh displays the message, "Looking for PSPrinter..."
and then "Cannot find printer on chooser".
Possible Solutions:
•
•
•
9-10 Troubleshootingbb
Make sure all cables are connected and seated
properly.
Make sure the controller is on line. The On Line
key LED should be lit and the display window
should read READY/IDLE or READY/
PRINTING. If not, press the On Line key once to
put the controller on line.
If you work in a Macintosh environment, make
sure the controller is selected in the Chooser.
Be patient. Each time you turn your controller on,
a RAM test is performed. For controllers with
large RAM sizes, this test can take a little longer.
Open the System Folder and view by icon.
Open the Extensions folder and view by icon.
Drag the PSPrinter driver out of the Extensions
folder and into the System Folder.
_____________________________________