Table of Contents
Advertisement
Go to either the Auto Setup or the Manual Setup section to select the
controller and configure the PPD for your system.
Using Auto Setup
Use the PostScript Auto Setup feature to select and configure the
Accel-a-Graphix CT4 PPD, after the PSPrinter driver is installed.
1.
Select Chooser from the Apple menu. The Chooser window
appears.
2.
Select the appropriate PSPrinter icon in the Chooser window
(fig. 3.1). A list of available printers and controllers appears to
the right, including your new controller (fig. 3.1).
Note: On a network with many printers and controllers, you
may have to scroll to find the controller listing. If it
does not appear, check all LocalTalk or Ethernet cable
connections (see "Connecting in a Macintosh
Environment" in chapter 2 for details).
PSPrinter
3.
Select the controller listing (fig. 3.1).
3-4 Macintosh
Setupbb
Chooser
Type:
PostScript Printer
Accel-a-Graphix CT4
Setup...
Active
AppleTalk
Inactive
Fig. 3.1 Chooser Window
____________________________________
Background Printing
On
Off
7.5
Advertisement
Table of Contents
Troubleshooting
