Printing From Autocad 12 - Xante Accel-a-Graphix CT4 User Manual

13. Select Exit to the Configure menu.
At this point you have configured AutoCAD to print from your
controller.

Printing from AutoCAD 12

After you configure AutoCAD to print from your controller, use the
following procedure to print from AutoCAD.
1. Open your AutoCAD program.
2. Select Plot from the File menu. The Plot Configuration
window appears (fig. A.1).
Device and Default Information
Accel-a-Graphix CT4
Device and Default Selection...
Pen Parameters
Pen Assignment... Optimization...
Additional Parameters
Display
Extents
Limits
View
Windows
Views... Window...
Fig. A.1 The Plot Configuration Window
3. Click Device and Default Selection.... A pop-up menu appears
with a list of available printers. Choose the controller you
configured with the ADI - 4.2 driver. The pop-up menu
disappears and the selected controller appears in the Plot
Configuration window.
A-10 Application Notesbb
Plot Configuration
Paper Size and Orientation
Inches
MM
Plot Area 16.50 By 10.50
Scale, Rotation and Origin
Hide Lines Plotted Inches = Drawing Units
10.5
Adjust Area Fill
Scale To Fit
Plot Preview
Plot To File
File Name...
Preview...
Cancel
OK
___________________________________
Size... User
Rotation and Origin...
9
Partial Full
Help