The Printer Menus - Xante Accel-a-Graphix CT4 User Manual

PRINT: PRINTER1
PRINTER1: ENABLE
PRINTER1: MEDIAWI
PRINTER1: MATTE
PRINTER1: HPPAL
PRINT: MARGINS
MARGINS: EXPANDED
margins: normal

The Printer Menus

The Printer menus—PRINT:PRINTER1, PRINT:PRINTER2,
PRINT:PRINTER3, and PRINT:PRINTER4—allow you to select
and configure the individual printers connected to the controller.
Printer menus only appear for printers attached to the controller.
Depending on the model of your controller, up to four printers can be
attached. For example, if the first two printers are attached, you will
see the PRINT:PRINTER1 and the PRINT:PRINTER2 menu.
PRINT:PRINTER1 will be used for examples since each Printer
menu contains the same four submenus. These submenus are
• ENABLE
• HPPAL
• MEDIAWI (Media width)
• MATTE
_______________________________________
SETUP: PRINT
ENTER
PRINT: SCREEN PRINT: CASCADE
SCREEN: X-SCREEN CASCADE: YES
screen:diffuse 1 cascade: no
screen:diffuse 2
screen:diffuse 3
screen: spot
PRINT: MAXWIDTH
PRINT: SAVE MEDIA
maxwidth: 3 ft
SAVE MEDIA: YES
maxwidth: 4 ft
save media: no
MAXWIDTH: 10 FT
maxwidth: 11 ft
maxwidth: 50 ft
Fig. 5.3 The Print Menu
MENU
PRINT: ACROSS
PRINT: BEST FIT
ACROSS: YES
BEST FIT: YES
across: no best fit: no
PRINT: AUTOREDUCE PRINT: ORIENT
AUTOREDUCE: YES ORIENT: LANDSCAPE
orient: portrait
autoreduce: no
orient: none
Configuration 5-11
MENU