Table of Contents
Advertisement
•
Use Retrieve Factory Default Transfer Curves to retrieve and
display the transfer curve that is stored in the controller's ROM
(the factory default transfer curve).
•
Use Reset Transfer Curves to Factory Default to delete all
transfer curves that have been sent to the controller and reset the
controller to use the factory default transfer curve as its default
curve.
Print allows you to print the fountains (color gradient) for transfer
curves.
•
Print Current Color Fountain from Sliders prints the fountain of
the selected color for the transfer curve that is open (displayed in
the Transfer Curve window).
•
Print Current Color Fountain from Controller prints the fountain
of the selected color for all transfer curves in the controller.
•
Print All Fountains from Sliders prints the fountains for all
colors for the transfer curve that is open (displayed in the
Transfer Curve window).
•
Print All Fountains on Controller prints the fountains for all
colors for all transfer curves in the controller.
Printer Calibration
Custom transfer curves allow you to adjust your printer's
performance to eliminate inconsistencies caused by age, mechanical
changes, and environmental conditions. You can create custom
transfer curves using XANTÉ's Command Center, the XANTÉ
Linearizer, and a supported color measuring device. The Colortron II
ships with your Accel-a-Graphix CT4. Check with XANTÉ
Technical Support for information about using other color measuring
equipment.
8-10 Color
Managementbb
__________________________________
Advertisement
Table of Contents
Troubleshooting
