Introduction; Status Messages; Controller Status Messages - Xante Accel-a-Graphix CT4 User Manual

Introduction

Whether you are a new user of the Accel-a-Graphix CT4 controller
or an old pro, this chapter can help you correct most problems
encountered. You will find as you go through this section that
printing issues usually derive from one of four areas: applications,
computer hardware, printer, or controller hardware.
This chapter covers the controller hardware. It starts with status
messages and a preliminary troubleshooting procedure. Then it goes
over miscellaneous troubleshooting. The final section provides
specifics on XANTÉ Technical Support and how to place a service
call.

Status Messages

Often, you can solve questions by checking the display window on
your controller's front panel for status or service messages.

Controller Status Messages

The following messages alert you to the general status of your
controller or to situations which you can solve easily without a long
troubleshooting process or a service call.
Accel-a-Graphix
CONNECT PRINTER X
______________________________________
The power to the controller has been
turned on and the controller is coming
up to full power before beginning to
initialize.
A printer is enabled through PostScript
but not attached to the controller. The X
will be replaced by the number of the
printer which is enabled but not
attached.
Troubleshooting 9-3