The Best Fit Menu - Xante Accel-a-Graphix CT4 User Manual

The Best Fit Menu

The Best Fit menu, PRINT:BEST FIT, is useful when more than one
printer is attached to the controller. The controller compares an
image size to the media width of enabled printers to select the most
appropriate printer for the job. If the printer it selects is busy, it sends
the job to the printer with the next best fit. This menu directs the
controller to hold the job until the initially selected printer is
available. Options are to enable (YES) or to disable (NO) this
feature. If you select YES, the job goes to the next idle printer that
has the best available paper size for that job. The factory default is
YES.
Best Fit Disabled (No)
Best Fit Enabled (Yes)
5-16 Configurationbb
Job 1
Printer 2
Printer 1
36" Paper
24" Paper
Job 2 Job 1
Printer 1 Printer 2
36" Paper
24" Paper
Fig. 5.7 The Best Fit Feature
______________________________________
Job 2