The Localtalk, Ethertalk, And Lineprinter Menus; The Enable Menu - Xante Accel-a-Graphix CT4 User Manual

The LocalTalk, EtherTalk, and LinePrinter
Menus
Use the LocalTalk menu, I/F:LTALK, to configure the LocalTalk
interface. Use the EtherTalk and LinePrinter menus (I/F: ETALK
and I/F:LPR) to configure the Ethernet interface for those protocols.
(See the Novell Print Server menu to configure the Ethernet interface
for Novell.) These three menus include the following submenus.
• ENABLE
• SPOOL
I/F: XXXX
XXXX: ENABLE
ENABLE: YES
enable: no
Fig. 5.18 The LocalTalk, EtherTalk, and LinePrinter Menus
Note: The XXXX in figure 5.18 will be replaced by the specific
interface menu chosen.

The Enable Menu

The Enable menu, I/F: XXXX:ENABLE, allows you to enable (YES)
or to disable (NO) the LocalTalk interface or the Ethernet interface
for EtherTalk or Line Printer protocols on your controller. The XXXX
will be replaced by the specific interface menu chosen, either
LTALK, ETALK or LPR. The factory default is YES.
5-32 Configurationbb
ENTER
XXXX : SPOOL
spool: yes
SPOOL: NO
______________________________________
MENU