To change this numeric value once you are in this menu, use the Left
Arrow
key to lower the value or use the Menu
value to the desired amount; then, press the Enter
the selection.
The Spool Menu
The Spool menu, RS232:SPOOL, allows you to enable (YES) or
disable (NO) spooling to the RS232 interface. The factory default is
NO. (See "Using the Spooler" in chapter 6 for more details.)
The Parallel Menu
The Parallel menu, I/F:PARALLEL, allows you to configure the
parallel interface. The Parallel menu includes the following submenus.
•
ENABLE
•
MODE
•
BUFFER
•
SPOOL
PARALLEL: ENABLE
ENABLE: YES
enable: no
5-30
Configurationbb
I/F: PARALLEL
ENTER
PARALLEL: BUFFER
PARALLEL: MODE
buffer: 8K
MODE: PS STD
buffer: 16K
mode: ps bin
buffer: 32K
mode: ps tbcp
buffer: 64K
BUFFER: 128K
buffer: 256K
buffer: 512K
buffer: 1024K
buffer: 2048K
buffer: 4096K
Fig. 5.17 The Parallel Menu
______________________________________
key to raise the
key to confirm
MENU
PARALLEL: SPOOL
spool: yes
SPOOL: NO