Table of Contents
Advertisement
Note: The print server name is not case sensitive. This name is
changed automatically to all uppercase by the controller
when the name is entered.
Login Name
The login name, which is the print server's name, must be set by
your system administrator before print service can begin. This name,
like the print server name, must follow Novell NetWare naming
conventions substituting the underline (_) character for any of the 16
restricted PostScript characters. (See the previous section, "Print
Server Name," for a list of the restricted characters.) The login name
is set using the SetPSLogin Name operator from the XanteProcs
ProcSet.
Note: The login name is not case sensitive. This name is
automatically changed to all uppercase by the controller
when the name is entered.
Password
The password must be set by your system administrator before print
service can begin. This name, like the print server name, must follow
Novell NetWare naming conventions substituting the underline (_)
character for any of the 16 restricted PostScript characters. (See the
earlier section, "Print Server Name," for a list of the restricted
characters.) The password is set using the SetPSPassword operator
from the XanteProcs ProcSet.
Caution:
The password is case sensitive and write-only. There is
no way to read the password since there is not an
operator to return it. Be sure to choose a password that
you can remember and which meets the Novell NetWare
naming conventions.
___________________________________
Routine Operations 6-31
Advertisement
Table of Contents
Troubleshooting
