Using Macintosh Applications; Using Windows - Xante Accel-a-Graphix CT4 User Manual

Using Macintosh Applications

When operating in a Macintosh environment. Specific printing tasks
may vary depending upon the application. For example, selections
for the number of copies to print, the page orientation, and the media
size options are located under different menus or dialog boxes. You
need to check the application documentation to determine where to
find and how to use these options.
You can make these selections through the controller's front panel
using the procedure in "Selecting Menu Options" in chapter 5.
However, application selections usually override those made through
the controller's front panel. If there is a question or if the job does
not print as expected, select the desired setting both through the
application and through the front panel.
Note: See appendix A, "Application Notes," for details on specific
applications. Also, should any application notes become
available after this manual is printed, they will be on a drop-
in sheet included with your Controller package.

Using Windows

XANTÉ has created a Windows 3.1 printer description file to help
you print from Windows and Windows applications. Instructions for
installing this file are in chapter 4. Using this file and the Adobe
Windows driver with your Windows applications to perform routine
activities such as selecting the number of copies to print, manual
feed, and the media orientation and size are covered in the Adobe
PostScript Printer Driver User's Guide. This guide also includes
information on printing to a file, downloading Type 1 fonts, a
summary of printer settings, and a troubleshooting section.
If you run into questions or problems working in a Windows
application, see chapter 10, "Troubleshooting," in this manual, the
Adobe PostScript Printer Driver User's Guide, or your Windows
documentation.
6-26 Routine Operationsbb __________________________________