Table of Contents
Advertisement
Printer1 Matte
The Printer1 Matte options can be set through the PPD or the front
panel. This menu allows you to inform the controller of desired
horizontal and vertical space between multiple copies of a print job.
Options include Printer's default, None, 0 inch, 0.10 inch, 0.20 inch,
0.30 inch, ..., and 2.00 inch. None allows the controller to use
whatever matte size the job specifies without changing the printer
setting.
Note: You will see a matte menu for each enabled printer that is
attached to the controller.
Fig. 6.21 The Printer1 Matte Options
6-22 Routine
Operationsbb
__________________________________
Advertisement
Table of Contents
Troubleshooting
