READY/PRINTING
RESET TO STOP
RESETTING JOB
TEST PRINT
WAITING
Preliminary Troubleshooting
Preliminary troubleshooting covers both a general once over of the
controller and then specific checks depending on the environment,
Macintosh, PC, or Ethernet.
The General Checkup
If you experience problems printing, the following quick checkup
may provide an easy, fast solution regardless of your printing
environment.
•
Make sure the power cord is plugged into the controller
and the power source.
•
Make sure the power source is working.
•
Make sure all cables are connected and seated properly.
______________________________________
The controller is completing a print job
and ready to accept a new job to begin
processing.
The controller has been taken off line
during an active job.
The controller is resetting after the Reset
key has been pressed and an active job
has been cancelled.
The controller is printing a test page
when the controller is off line and not
working within the menu structure.
The controller is waiting to receive more
data on a job before printing.
Troubleshooting 9-5