*
Any printer connected to the controller contains Page Width, Matte,
and Color Palette selections. Since printer 1 is the factory default
printer, it is used in examples for these selections.
When you add a printer to the network, you must change the Printer
Installed option under Configure in the Chooser Setup window to
True for that printer to be recognized on the network.
Note: All Printer's default options allow you to use whatever
setting the printer already is using. You can check current
printer settings through the front panel.
Scale Page
The Scale Page options can be set only in the PPD. This menu allows
you to enlarge an image outside of the application. For example a 2"
x 4" original FreeHand image can be scaled up to 20 times the
original size from the PPD. Options include Printer's default, None,
2X, 3X, ..., 20X. The factory default is Printer's default.
Fig. 6.1 The Scale Page Options
___________________________________
Routine Operations 6-5