Table of Contents
Advertisement
Figure 149. Installing the fan module
After this task is completed
• Complete the parts replacement. See
"Complete the parts replacement" on page
324.
Demo Video
Watch the procedure on YouTube
Front operator panel replacement
Follow instructions in this section to remove and install the front operator panel.
Remove the front operator panel
Follow instructions in this section to remove the front operator panel.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
ThinkEdge SE360 V2 User Guide
148
Advertisement
Table of Contents
Troubleshooting
