Watch the procedure
A video of this procedure is available at YouTube:
AooAU9z6S2EXObfHoLImDm
Procedure
Step 1.
Install the wireless adapter.
a.
Align the wireless adapter with the standoffs on the system board; then, lower the wireless
adapter until it is firmly seated.
b.
Secure the wireless adapter with three screws.
Figure 311. Installing the wireless adapter
Step 2.
Connect the WLAN cables and the Bluetooth antenna cable to the wireless adapter.
a.
Locate the corresponding connector on the wireless adapter.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 5
Hardware replacement procedures
295