Lenovo ThinkEdge SE360 V2 User Manual page 368

• XClarity Controller: The system can be unlocked through Lenovo XClarity Controller. See
system" on page 360
Important:
• When System Lockdown Mode Control status is XClarity Controller, if XClarity Controller is reset to
defaults, the default credentials can be used to login to XClarity Controller and unlock the system. It is
important to use security controls such as an UEFI PAP to prevent unauthorized users from executing an
XClarity Controller reset to defaults. For the highest level of security, it is recommended to set System
Lockdown Mode Control to ThinkShield Portal.
• Once the System Lockdown Mode Control status is changed to ThinkShield Portal, it cannot be changed
back to XClarity Controller.
• To set System Lockdown Mode Control to ThinkShield Portal, use Lenovo XClarity Essentials
UpdateXpress. See "Upgrading lockdown control mode" section in
the details.
Activate the system
Complete the following steps to activate the system through ThinkShield Key Vault Portal.
Have a Lenovo ID with proper permission
Before activating a system for the first time, make sure to have a Lenovo ID with proper permission to log in
to the ThinkShield Key Vault Portal web interface or ThinkShield mobile app.
Note: The role of Lenovo ID should be Organization Admin, Maintenance User or Edge User to activate
the system.
• For Lenovo ID setup, see
• To log in to the Lenovo ThinkShield Key Vault Portal, see
Activation methods
There are different methods to activate the system through ThinkShield Key Vault Portal. Depending on the
environment of the server, decide the most suitable way to activate the system.
• Mobile App activation
For Mobile App activation method, you will need an Android or iOS based smart phone with cellular data
connection. Follow one of the following procedures to complete Mobile App activation:
– Connection with the USB cable that came with the smart phone
– Connection with Bluetooth
Connection with the USB cable that came with the smart phone
1. Connect the power cable to your ThinkEdge SE360 V2.
2. Download the ThinkShield Edge Mobile Management App from Google Play Store or Apple App Store
to your Android or iOS based smart phone (search term: "ThinkShield Edge").
3. Log-in to the ThinkShield Edge Mobile Management App using your Organization registered ID.
4. When App instructs to do so, connect USB cable with USB mobile phone charging cable to the
ThinkEdge SE360 V2.
Note: When the smart phone prompts for the USB connection purpose, choose data transfer.
5. Follow the "Activate Device" on-screen instructions to complete secure activation of the system.
6. When activated successfully, ThinkShield Edge Mobile Management App will provide "Device
Activated" screen.
ThinkEdge SE360 V2 User Guide
358
to unlock the system.
https://passport.lenovo.com
https://pubs.lenovo.com/lxce-ux/
.
https://portal.thinkshield.lenovo.com
"Unlock the
for
.