Lenovo ThinkEdge SE360 V2 User Manual page 276

M.2 assembly configuration
Procedure
Step 1. Connect the riser assembly cables.
Note: If necessary, remove the memory modules from DIMM slot 3 and 4 for easier operation. See
"Remove a memory module" on page
Cable
1a
1
1b
2a
2
2b
a. Connect the power cable to
and M.2 cabled adapter power connector on the system board.
1b
ThinkEdge SE360 V2 User Guide
266
187.
From: M.2 cabled adapter
Power connector 1
Power connector 2
MCIO 1 connector
MCIO 2 connector
M.2 cabled adapter / PCIe cabled riser card power connector
1a
To: System board
M.2 cabled adapter / PCIe
1a
cabled riser card power
connector
M.2 cabled adapter power
1b
connector
PCIe Gen 4 MCIO 1
2a
connector
PCIe Gen 4 MCIO 2
2b
connector
Cable length
170/200mm
150mm