Table of Contents
Advertisement
Lock position switch connector on the I/O module board
1
Step 3.
Insert the tab of the keylock bracket into the slot on the chassis; then, lower the keylock bracket
down until it is seated in place.
Figure 191. Installing the system security keylock
Step 4.
Let the top side of the node facing up.
Step 5.
Secure the system security keylock with one screw
Figure 192. Fastening the screw
After this task is completed
1. Complete the parts replacement. See
Demo Video
ThinkEdge SE360 V2 User Guide
184
"Complete the parts replacement" on page
324.
Advertisement
Table of Contents
Troubleshooting
