For the configuration with full-height PCIe adapter
Step 3.
Align the front of the riser assembly with the edge of the chassis; then, lower the riser assembly to
the node.
Figure 283. Lowering the riser assembly
Step 4.
Route the cables between the riser cage and the processor air baffle.
a.
Push the cables toward the riser cage until the cables are seated in the notch of riser cage.
b.
Push the rubber part of processor air baffle to bend it until it is against the cables.
ThinkEdge SE360 V2 User Guide
264
For the configuration without full-height PCIe
adapter