Lenovo ThinkEdge SE360 V2 User Manual page 218

Figure 218. Removing the PMB status LED cable
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install the PMB status LED cable
Follow instructions in this section to install the PMB status LED cable.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
ThinkEdge SE360 V2 User Guide
208
"Install the PMB status LED cable" on page
and "Safety inspection checklist" on page 48
208.
to ensure that you