Lenovo ThinkEdge SE360 V2 User Manual page 62

Hide thumbs Also See for ThinkEdge SE360 V2:
Table of Contents

Advertisement

Memory modules and processor layout
Figure 21. Memory modules and processor layout
The memory-channel configuration table below shows the relationship between the processor, memory
controllers, memory channels, and memory module slot numbers.
Table 13. Channel and slot information of DIMMs around a processor
Controller
Channel
DIMM slot
number
Memory module installation guideline
• This server supports
• This server supports the following type of memory modules:
– Double-data-rate 4 (TruDDR4) error correcting code (ECC) 3200 MHz registered DIMM (RDIMM)
• When you replace a DIMM, the server provides automatic DIMM enablement capability without requiring
you to use the Setup Utility to enable the new DIMM manually.
Attention:
• Do not mix x4 and x8 DIMMs.
• Install DIMMs of the same speed for optimal performance. Otherwise, the BIOS will find and run the
lowest speed among all channels.
ThinkEdge SE360 V2 User Guide
52
iMC0
Channel 0
Channel 1
1
2
"Independent mode" on page
Rear
Processor
Front
53.
iMC1
Channel 1
Channel 0
3
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

7dam

Table of Contents