Table of Contents
Advertisement
Step 4.
Open the retaining clip with a memory module tool.
Attention:
• Due to space constraints, use a memory module tool to open the retaining clips. Do not use
pencils or other fragile tools. When you received your server, the memory module tool is in the
material box.
• To avoid breaking the retaining clips or damaging the memory module slots, handle the clips
gently.
a.
Place the tip of the tool in the recess on the top of the retaining clip.
b.
Carefully rotate the retaining clip away from the memory module slot.
Figure 200. Opening retaining clip
Step 5.
Install the memory module.
a.
Align the memory module with the slot.
b.
Firmly press both ends of the memory module straight down until the retaining clip snaps
into the locked position.
.
Chapter 5
Hardware replacement procedures
193
Advertisement
Table of Contents
Troubleshooting
