Lenovo ThinkEdge SE360 V2 User Manual page 280

Figure 290. Removing the rubber feet
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install the rubber feet
Follow instructions in this section to install the rubber feet.
About this task
Attention:
• Read "Installation Guidelines" on page 47
work safely.
Procedure
Step 1. Let the bottom side of the node facing up.
Step 2. Remove the film on the rubber feet.
Step 3. Stick the rubber feet to the node as shown.
ThinkEdge SE360 V2 User Guide
270
"Install the rubber feet" on page
and "Safety inspection checklist" on page 48
270.
to ensure that you