Figure 90. Installing the shipping bracket
Step 3.
Secure the captive screws of the shipping bracket.
a.
Fasten the captive screw on the top.
b.
Fasten the four captive screws on both sides.
c.
Fasten the three captive screws on the front.
Figure 91. Fastening the screws
Remove the rear dust filter
Follow instructions in this section to remove the rear dust filter.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• If the node is installed in an enclosure or mounted, remove the node from the enclosure or mount. See
"Configuration guide" on page
and
"Safety inspection checklist" on page 48
54.
.
Chapter 5
Hardware replacement procedures
to ensure that you
97