Lenovo ThinkEdge SE360 V2 User Manual page 30

Front view with 10/25GbE I/O module
Note: Depending on the model, your server might look slightly different from the illustration.
Figure 3. Front view with 10/25GbE I/O module
Table 4. Components on the front view with 10/25GbE I/O module
"Left wing of riser assembly" on page 20
1
"Right wing of riser assembly" on page 20
2
"Front operator panel" on page 21
3
"USB 3.2 Gen 1 (5 Gbps) Type-A connectors (USB 1
4
and 2)" on page 21
"USB 3.2 Gen 1 (5 Gbps) Type-C connector with
5
display support (USB 3)" on page 21
"USB 2.0 Type-C connector with Lenovo XClarity
6
Controller management (USB 4)" on page 21
1 2 Riser assembly
Depending on the model, the riser assembly supports one of the following configurations:
Left wing of riser assembly
1
One PCIe Gen4 x16 FH/HL adapter
Two 7mm hot-swap SATA/NVMe drives
Four NVMe Gen4 x4 M.2 storage drives
One PCIe Gen4 x16 FH/HL adapter
Two 7mm hot-swap SATA/NVMe drives
One PCIe Gen4 x16 HH/HL adapter + geotracking
module
One PCIe Gen4 x16 HH/HL adapter + geotracking
module
ThinkEdge SE360 V2 User Guide
20
"XCC system management port (1GbE RJ-45)" on
7
page 21
"2.5GbE RJ-45 connectors (LAN 1 and 2)" on page 21
8
"10/25GbE SFP28 connectors (LAN 3 to 6)" on page 21
9
LAN 6 with shared-NIC feature for Lenovo XClarity
Controller
"Bluetooth antenna or Bluetooth antenna filler" on
10
page 21
For the models without wireless module, install the
Bluetooth antenna filler to the corresponding slot for
proper operation.
"XCC WLAN antennas" on page 22
11
"x86 WLAN antennas" on page 22
12
Right wing of riser assembly
2
Four NVMe Gen4 x4 M.2 storage drives
Four NVMe Gen4 x4 M.2 storage drives
Four NVMe Gen4 x4 M.2 storage drives
One PCIe Gen4 x16 HH/HL adapter
One PCIe Gen4 x16 HH/HL adapter
One PCIe Gen4 x16 HH/HL adapter
Four NVMe Gen4 x4 M.2 storage drives