Table of Contents
Advertisement
CAUTION:
Hot surface nearby.
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• For proper cooling and airflow, reinstall the air baffle before powering on the server. Operating the server
with the air baffle removed might damage server components.
Procedure
Step 1.
Pinch the blue touch points on the air baffle, and align the air baffle with the guide pins on the
chassis.
Step 2.
Lower the air baffle into the chassis until it is seated in place.
Figure 103. Installing the air baffle
After this task is completed
Complete the parts replacement. See
Demo Video
Watch the procedure on YouTube
Remove the PMB air baffle
Follow instructions in this section to remove the PMB air baffle.
and
"Safety inspection checklist" on page 48
"Complete the parts replacement" on page
324.
.
Chapter 5
Hardware replacement procedures
to ensure that you
107
Advertisement
Table of Contents
Troubleshooting
