Lenovo ThinkEdge SE360 V2 User Manual page 270

Cable
Power connector
1
2a
2
2b
Note: Make sure to route the cables as shown in the illustration.
a. Connect
b. Connect
c. Connect
Step 3. Reinstall the processor air baffle. See
page 114.
Note: Make sure to adjust the processor air baffle according to the configuration.
For the configuration with full-height PCIe adapter
ThinkEdge SE360 V2 User Guide
260
From: PCIe cabled riser card
MCIO 1 connector
MCIO 2 connector
the power cable to the system board.
1
the MCIO2 branch of riser card signal cable to the system board.
2a
the MCIO1 branch of riser card signal cable to the system board.
2b
To: System board
M.2 cabled adapter / PCIe cabled
riser card power connector
MCIO 1 connector
2a
MCIO 2 connector
2b
"Install the processor air baffle and air flow sensor board" on
For the configuration without full-height PCIe
adapter
Cable length
100mm
140/120mm