Lenovo ThinkEdge SE360 V2 User Manual page 252

Figure 258. Removing an M.2 drive
Note: If necessary, repeat this procedure to other M.2 drives to be removed.
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove the PCIe assembly
Procedure
Step 1. Remove the PCIe adapter from the riser cage.
a. Loosen the screw that secures the PCIe adapter.
b. Slide the PCIe adapter outward to remove it.
Note: If no PCIe adapter is to be installed to this slot, insert the PCIe filler and secure it with
one screw.
Figure 259. Removing the PCIe adapter
Step 2. Remove the PCIe riser card from the riser cage.
a. Loosen the two screws that secure the riser card.
ThinkEdge SE360 V2 User Guide
242
"Install components to the right wing of riser assembly" on page 243.