Figure 216. PMB status LED cable connecting to the DC power module board (DC PMB)
PMB status LED connector on the DC power module board (DC PMB)
1
Figure 217. PMB status LED cable connecting to the internal power supply unit (AC PMB)
PMB status LED connector on the internal power supply unit (AC PMB)
1
Step 3.
Stab the sleeve of the PMB status LED cable with a pointed tool to detach the cable from the
chassis; meanwhile, pinch the front end of the PMB status LED cable, and pull it outward to remove
it.
.
Chapter 5
Hardware replacement procedures
207