Table of Contents
Advertisement
Procedure
Step 1.
Loosen the two captive screws that secure the rear bezel; then, remove the bezel.
Figure 92. Removing the bezel
Step 2.
Remove the dust filter from the chassis.
Note: For optimal server operation, make sure to install a replacement dust filter.
Figure 93. Removing the dust filter
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
ThinkEdge SE360 V2 User Guide
98
"Install the rear dust filter" on page
99.
Advertisement
Table of Contents
Troubleshooting
