• Read
"Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1.
Locate the MicroSD socket on the system board. See
Step 2.
Install the MicroSD card.
a.
Place the MicroSD card into the socket.
b.
Close the socket lid.
c.
Slide the socket lid to the lock position.
Figure 203. Installing the MicroSD card
After this task is completed
Complete the parts replacement. See
Demo Video
Watch the procedure on YouTube
Node cover replacement
Follow instructions in this section to remove and install the node covers.
Remove the top cover
Follow instructions in this section to remove the top cover.
S014
and
"Safety inspection checklist" on page 48
"Complete the parts replacement" on page
"System-board connectors" on page
324.
.
Chapter 5
Hardware replacement procedures
to ensure that you
28.
197