Lenovo ThinkEdge SE360 V2 User Manual page 71

Figure 31. Removing the shipping bracket
Install a node to the rack
Follow instructions in this section to install a node to the rack.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
R006
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
and "Safety inspection checklist" on page 48
54.
.
Chapter 5 Hardware replacement procedures
to ensure that you
61