Table of Contents
Advertisement
Figure 269. Disconnecting the signal cable
MCIO 1 connector
1
After this task is completed
• Reinstall the riser assembly to the node. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install PCIe assembly
Procedure
Step 1.
Install the PCIe cabled riser card to the riser cage.
a.
Align the riser card with the guide pins on the riser cage; then, push the riser card towards the
riser cage until it is firmly seated.
b.
Secure the riser card with two screws.
MCIO 2 connector
2
"Install the riser assembly to the node" on page
Chapter 5
259.
.
Hardware replacement procedures
251
Advertisement
Table of Contents
Troubleshooting
