Table of Contents
Advertisement
Figure 274. Installing the riser card
Step 2.
Install the PCIe adapter to the riser cage.
a.
(Optional) If a PCIe filler is installed in the slot, loosen the screw that secures the filler; then,
remove the filler. Save the filler for future use.
b.
Align the PCIe adapter with the slot; then, carefully slide the adapter into the slot until it is
firmly seated.
Note: Make sure not to let the adapter touch the edge of the riser cage.
c.
Secure the PCIe adapter with one screw.
Figure 275. Installing the PCIe adapter
Step 3.
Install the geotracking module cage.
a.
Align the two tabs of geotracking module cage with the slots on riser cage; then, push the
geotracking module cage toward the riser cage until it is seated in place. The edge of
geotracking module cage should be inserted between the PCIe adapter and the riser cage.
ThinkEdge SE360 V2 User Guide
256
Advertisement
Table of Contents
Troubleshooting
