Table of Contents
Advertisement
Figure 344. SMA assembly locations
Processor side SMA assembly (SMA connector 1,
1
2)
Step 3.
If the bracket is secured to the SMA assembly, loosen the screw that secure the bracket; then,
separate the bracket from the SMA assembly.
Figure 345. Removing the bracket
Step 4.
Fasten the cables to the bracket with the wrench.
• For the processor side SMA assembly: Fasten the gray cable (XCC WLAN #1) and the white
cable (XCC WLAN #2).
• For PMB side SMA assembly: Fasten the blue cable (x86 WLAN #3) and the black cable (x86
WLAN #4).
PMB side SMA assembly (SMA connector 3, 4)
2
.
Chapter 5
Hardware replacement procedures
313
Advertisement
Table of Contents
Troubleshooting
