Lenovo ThinkEdge SE360 V2 User Manual page 296

• If the node is installed in an enclosure or mounted, remove the node from the enclosure or mount. See
"Configuration guide" on page
Watch the procedure
A video of this procedure is available at YouTube:
AooAU9z6S2EXObfHoLImDm
Procedure
Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Remove the PMB air baffle. See
c. Lift the riser assembly from the node. See
228.
Step 2. Disconnect the cables from the wireless adapter.
a. Pinch and press the side of the cable holder; then, lift up one end of the cable holder from the
wireless adapter.
Figure 298. Lifting the cable holder
b. Pivot the cable holder to
ThinkEdge SE360 V2 User Guide
286
54.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Remove the top cover" on page
"Remove the PMB air baffle" on page
unlock position.
2
197.
"Remove the riser assembly from the node" on page
107.