Lenovo ThinkEdge SE360 V2 User Manual page 120

Hot surface nearby.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• For proper cooling and airflow, reinstall the air baffle before powering on the server. Operating the server
with the air baffle removed might damage server components.
Procedure
Step 1. Pinch the blue touch points on the air baffle, and align the air baffle tabs with the slots on the
chassis.
Step 2. Lower the air baffle into the chassis until it is seated in place.
Figure 105. Installing the air baffle
Note: Depending on the model, your server might look slightly different from the illustration.
After this task is completed
Complete the parts replacement. See
Demo Video
Watch the procedure on YouTube
Remove the processor air baffle and air flow sensor board
Follow instructions in this section to remove the processor air baffle and air flow sensor board.
About this task
S002
ThinkEdge SE360 V2 User Guide
110
and "Safety inspection checklist" on page 48
"Complete the parts replacement" on page
to ensure that you
324.