Installing Power Source Mains Plug - Kemppi X5 FastMig Operating Manual

2.1 Installing power source mains plug

Only an authorized electrician is allowed to install the mains cable and plug.
Do not connect the machine to the mains before the installation is complete.
Install the 3-phase plug according to the X5 FastMig power source and site requirements. Refer also to "Technical data"
on page 112 for power source specific technical information.
The mains cable includes the following wires:
1. Brown: L1
2. Black: L2
3. Grey: L3
4. Yellow-green: Protective earth
Cable type and fuse rating requirements:
Unit amperage
400 A
500 A
© Kemppi
High voltage version (380-460V)
Cable type
2
4 mm
2
6 mm
24
Operating manual - EN
Fuse rating
25 A
32 A
X5 FastMig
1920960 / 2144