Installing Mains Plug - Kemppi MasterTig 325DC Operating Manual

2.1 Installing mains plug

Only an authorized electrician is allowed to install the mains cable and plug.
Do not connect the machine to the mains before the installation is complete.
Install the 3-phase plug according to the MasterTig power source and site requirements. In the 1-phase power source
(MasterTig 235ACDC) the plug is pre-installed. Refer also to "Technical data" on page 64 for power source specific tech-
nical information.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
8
Operating manual - EN
1920900 / 2215