Read First; About X3 Mig Welder Product Series - Kemppi X3 Operating Manual

1.

READ FIRST

1.1 General
Congratulations on choosing the X3 MIG Welder series
power source. Used correctly, Kemppi products can sig-
nificantly increase the productivity of your welding, and
provide years of economical service.
This operating manual contains important information
on the use, maintenance and safety of your Kemppi
product. The technical specifications of the device can
be found at the end of the manual.
Please read the manual carefully before using the equip-
ment for the first time. For your own safety and that of
your working environment, pay particular attention to
the safety instructions in the manual.
For more information on Kemppi products, contact
Kemppi Oy, consult an authorised Kemppi dealer, or visit
the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to
change without prior notice.
Important notes
Items in the manual that require particular attention in
order to minimize damage and harm are indicated by the
symbols below. Read these sections carefully and follow
their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in dam-
age to the equipment or system.
Warning: Describes a potentially dangerous situation.
If not avoided, it will result in personal damage or fatal
injury.
Disclaimer
While every effort has been made to ensure that the infor-
mation contained in this guide is accurate and complete,
no liability can be accepted for any errors or omissions.
Kemppi reserves the right to change the specification of
the product described at any time without prior notice.
Do not copy, record, reproduce or transmit the contents
of this guide without prior permission from Kemppi.
© Kemppi Oy 2018

1.2 About X3 MIG Welder product series

X3 MIG Welder is a set of inverter-based welding equip-
ment intended for professional use in industrial MIG/MAG
welding applications. It can be connected to a 3-phase
mains power supply.
The X3 MIG Welder contains either a 400- or 500-ampere
X3 Power Source and the X3 Wire Feeder 300 unit for wire
feeding.
The system is equipped with gas type selection buttons.
It automatically presets the welding dynamic character-
istic according to your gas selection choice.
Enjoy welding with your Kemppi product!
3
X3 MIG Welder 1814