Settings - Backup, Restore And Reset; Settings - Licenses - Kemppi A7 MIG Welder 350 Operating Manual

4.3.11 Settings – Backup, restore and reset
Figure 4.17 Settings – Backup, restore and reset view
In the Backup, restore and reset menu you can
• - create a backup file from memory channels
and welding system settings by clicking on the
Backup button.
• restore settings from a backup file by clicking
on the Choose file button, browsing for the file,
selecting from the Memory channels,
system, Users and Network options the desired
items to restore and then press the Restore
button.
• reset all welding system settings and memory
channels by clicking on the Factory reset
• clear the logbook by clicking on the
reset button and confirming the operation in the
pop-up dialog.
4.3.12 Settings – Licenses
Figure 4.18 Settings – Licenses view
In the Licenses menu you can view the current software
licenses.
As an administrator or a supervisor you can add new
software licenses. See further information about the
available welding programs, modified processes, Match™
Welding functions and special enhanced arc performance solutions
on Kemppi's web site at www.kemppi.com.
button.
Logbook
© Kemppi Oy 2017
36
A7 MIG Welder 1735