5.4 Memory channels
Although the creation of memory channels is not within
the scope of the integration guide, it is useful to create
them before making a system backup. See the
Welder operating manual
for more information on the
memory channels.
5.5 System backup
After configuration of the system, it is a good idea to make
a system backup file. The backup file can save significant
A7 MIG
time if the memory channels, welding system settings,
user settings, and/or network settings need to be restored
for any reason.
To make this backup, go to
reset, and press the
Backup
the backup file, and the web browser starts downloading
it when it is ready. Specify the location on your computer
where you want to store the file.
The backup file can be used to transfer the settings
from one system to another.
© Kemppi Oy 2020
Settings
>
Backup, restore and
button. The system prepares
30
A7 MIG Welder
2002