P80 Touchscreen Console - Precor Experience Series Service Manual

CONSOLE
P10/P30/P31 consoles*
P30i consoles:
P31 StairClimber consoles**
Notes: *Except for P31 StairClimber machines.
**On SCL800 StairClimber P31 consoles, the console PAUSE key is replaced with
a STOP key.

P80 touchscreen console

Have the service access code ready and then use the following instructions to access the
standard service menu:
Steps
1. Make sure the P80 is set to the Welcome home page.
2. Press and hold the Pause key while pressing CH up >VOL down > VOL up > CH
down:
3. Use the touch keypad to type in the service access code.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
How to Access the Standard Service Menus
STEPS
1. Press (2-3 sec) and release the PAUSE
hardkey.
2. Immediately type in the access code.
1. Press (2-3 sec) and release the PAUSE
hardkey.
2. Immediately use the INCLINE number keys
to type in the access code.
1. Press (2-3 sec) and release the console
STOP hardkey.
2. Immediately type in the access code.
4 Standard Service Menus
Page 25