Operation Verification; Operation Verification Tests - Precor Experience Series Service Manual

Elliptical fitness crosstrainer
Hide thumbs Also See for Experience Series:
Table of Contents

Advertisement

Operation Verification

The Operation Verification tests verify that the machine is operating correctly and, upon suc-
cessful completion of each test, can be returned to service. Do these operation verification
tests at the end of a maintenance procedure or whenever it is necessary to ensure that the
machine is operating properly.

Operation Verification Tests

Error Code Verification Test
Verify that there are no current active logged error codes:
1. Access either the Error Log
consoles) and record any current active logged error codes:
On P10, P30, P30i and P31 LED consoles, Press & hold down the PAUSE
l
key for 6 seconds minimum to access the Error Log.
On P62, P80, and P82 touchscreen consoles, access Service menu
l
(51765761), select About > CPA Event Log.
2. Resolve any current active logged error code issues.
3. Delete resolved error codes:
On P10, P30, P30i and P31 LED consoles, access the Information Dis-
l
play (65) > scroll to Error Log.> select OK hardkey to view the Error Log.
To remove an error code, press/hold down the QUICK START key until the
"NO ERRORS" message shows.
. On P62, P80, and P82 touchscreen consoles, access the CPA Event
l
Log (access the Service menu (51765761) > select About > CPA Event
Log). Then select the CLEAR softkey to remove all error codes.
Console Verification Tests
Verify the LED console or touchscreen console operation.
LED consoles (P10, P30, P30i and P31) only
1. Access the Hardware Validation Diagnostic Test menu (51765761) and run the
following tests:
KEYPAD or KEYBOARD TEST: Select KEYPAD TEST and follow
l
prompts to run test.
DISPLAY TEST: Select DISPLAY TEST and follow prompts to run test.
l
2. Exit the Diagnostic Test menu, press the STOP key.
Touchscreen consoles (P62, P80, and P82) only
1
light-emitting diodes.
2
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
(LED
consoles) or
CPA
3 Operation Verification
Operation Verification Tests
2
Event Log (touchscreen
Page 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Experience efx700-16 baseExperience efx700-18 base

Table of Contents