Precor Experience Series Service Manual page 137

Removal Instructions
1. Remove the Drive Access cover see
2. Remove the left and right drive disk and Drive Top covers, see
3. Remove the left and right Stairarms from the Input Crank, see
ment" on page 152
4. Remove the Drive Housing covers see
5. Use a 1/2" socket to loosen the two Drive Components assembly fastener nuts (left
side). Do not remove the fastener nuts.
6. Use a 1/2" socket to loosen first stage belt tensioner and walk the first stage drive belt
off the pulleys. Remove the first stage drive belt. Retain belt for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Input Drive Assembly Replacement
"" on page 78.
" > " on page 84.
6 Replacement Procedures
" > " on page 80.
"Stairarm Replace-
Page 128