Led Console Standard Service Menus; Hardware Validation Diagnostics Tests Menu (51765761) - Precor Experience Series Service Manual

Elliptical fitness crosstrainer
Hide thumbs Also See for Experience Series:
Table of Contents

Advertisement

LED Console Standard Service Menus

Standard service menus for LED consoles (P10, P30, P30i and P31).

Hardware Validation Diagnostics Tests Menu (51765761)

Service Access Code: 51765761 (see
menu: Access code (51765761) > Hardware Validation Tests.
The Hardware Validation menu provides a set of automated hardware diagnostic tests and
calibration procedures used to troubleshoot, calibrate, and verify machine operation. The
diagnostic tests are customized for the particular equipment type and console configuration.
DIAGNOSTIC TEST
DISPLAY TEST
KEYBOARD TEST
HEART RATE
ACTIVE STATUS
(1)(2)(3)
LIGHT
AS LIGHT
(1)(2)(4)
BRIGHTNESS
RPM TEST
CROSSRAMP TEST
1
Active Status Light: Service and maintenance status light.
2
Elliptical Fitness Crosstrainer
3
steps per minute
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Service Menu Access Codes" on
TEST DESCRIPTION
Tests the console LEDs. Successively press the OK key to
verify each group of LEDs and verify that all LEDs illuminate.
Press Back to exit the test.
An illuminated LED map of the function keys will be shown.
Press each individual key and verify that the corresponding
LED extinguishes. Press and hold BACK to exit the test.
Tests the Unfiltered and Filtered pulse heart rate. Grasp the
grips to test the handheld heart rate. Use a Polar heart rate sim-
ulator to test the wireless heart rate. Press the BACK button to
exit this test.
Results: F xxx U xxx (F-filtered, U-unfiltered)
(Located in the Information Display on some models)
1
The current
ASL
light state (blue. pulsing blue, yellow, pulsing
yellow) or switched OFF on some models.
(Located in Club Settings > SET ASL BRIGHTNESS on some
models)
Sets the ASL light brightness level and ON/OFF state: HIGH.
MED, LOW, and OFF on selected models.
2
(EFX
only) menu: MACHINE TEST > RPM TEST
The current RPM (revolutions per Minute) value. The
(strides per minute) is equal to 2 X RPM.
menu: MACHINE TEST > CROSSRAMP TEST
4 Standard Service Menus
LED Console Standard Service Menus
page 22)
3
SPM
Page 32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Experience efx700-16 baseExperience efx700-18 base

Table of Contents