Precor Experience Series Service Manual page 74

ID
Removal Instructions
1. Remove the one #2 Phillips mounting screw and pull to remove the front top cover.
Retain part(s) and/or fastener(s) for installation.
Installation Instructions
1. Position the front top lift cover into position over the moving arm frame mounts and
press to fit the front tabs in place. Secure using the one mounting screw and fully
tighten.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Front Top Cover
6 Replacement Procedures
Covers and Panels Replacement
Page 65