Precor Experience Series Service Manual page 152

1. Disconnect the Linkarm from the Moving Arm:
a. Remove the #2 Phillips screw and the Outer Linkarm cover. Retain part(s)
and/or fastener(s) for installation.
b. Loosen the 9/16" Linkarm hex bolt and remove the Linkarm from the Moving
Arm. Retain part(s) and/or fastener(s) for installation.
c. Remove the Inner Linkarm cover from the Moving Arm. Retain part(s) and/or
fastener(s) for installation.
2. Disconnect the Linkarm from the Stairarm.
a. Remove the #2 Phillips screw and remove the Outer Linkarm Cover. Retain
part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Linkarm Replacement
Page 143